Fibaro Roller Shutter

Description

FIBARO Roller Shutter 3 is a new version of the radio-controller based on Z-Wave 5 technology. It works with motorized roller blinds, Venetian blinds, awnings, and gates. The Roller Shutter 3 is powered by a single-phase AC and provides precise positioning of blinds, awnings, or gates so they can be set to the position you choose. The module is also equipped with a power metering feature when used with a Eureka Smart Gateway.

Specifications:

• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports Z-Wave Network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
• To be installed with roller blind motors with electronic or mechanical limit switches,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle and dedicated roller blind switches,
• To be installed in-wall switch boxes.

Technical data:

• Power supply: 100-240V~ 50/60 Hz
• Rated load current: 4.2A for lamps and resistive loads1.7A for motors with a compensated power factor (inductive loads)
• Supported motor type: single-phase AC motors
• Required limit switches: electronic and mechanic
• Power consumption: up to 0.8W
• Operating temperature: 0-35°C
• Active element: micro-gap relay switch μ
• For installation in boxes: Ø ≥ 50mm, depth ≥ 60mm
• Radio signal power: EIRP up to 6dBm
• Radio frequency: 868.4 or 869.8 Mhz EU; 908.4 or 916.0 Mhz US; 921.4 or 919.8 Mhz ANZ; 869.0 Mhz RU
• Range: up to 50 m outdoors; up to 30 m indoors (depending on building materials)
• Dimensions: (L x W x H): 42.50 x 38.25 x 20.30 mm